HANAYAMA FINISHING LINE 2016 NEW

HANAYAMA FINISHING LINE 2016 NEW

• Model: OS12-HTFD-STS-2800
• Roll width: 2,800 m/m
• Machine speed: 5-50 m/min (MAX)(Work speed 20-30 m/min)
• Source of electricity:  400 V 60 Hz 3¢
• Stainless steel: SUS304 JIS
• Speed control system:  Inverter control

Batch Off Unit(Only frame)/ A-frame cart (Manufacture: EHWHA GLOTECH) (1 set)

• Frame works : SS 400 (1 set)
• Additional device: Swivel tension bar, “Sudare” divice  (1 set)
• Cloth detect: photo sensor  (1 set)

Accumulator (Each Front and Rear)  (2 sets)

• Cloth capacity: 60 m, 40 m
• Guide roll(Upper): ¢ 139.8 mm SUS 304 (Flame move) (1 lot)
• Guide roll(lower): ¢ 139.8mm SUS 304 (Flame fix)  (1 lot)
• Lift Unit: Loadless cylinder  92 (2 pcs)
• Support motor: 5 kg-cm torque motor (lower roll drive)  (2 sets)
• Speed compensate: YVGC500W  (1 set)
• Roll: ¢ 280 mm Rubber roll  (2 pcs)
• Drive: 2.2 kw geared motor  (1 set)
• Nip roll: ¢ 125 mm SUS 304 /Nipped by air cylinder  (1 set) feed roller has attached front, rear both side

Washing Unit (Pre-wet)

• Frame: SUS304  (1 set)
• Guide roll: ¢ 165 mm SUS 304 (4 pcs)
• Feed roll: ¢ 250 mm NBR Roll (Drive motor 2.2 kw Geared motor  (1 set)
• Pressured by air cylinder. (R/L)  (1 set)
• ¢ 139.8 mm SUS 304  (1 pc)
• Expand roll: Curved expand roll (NBR)  (1 set)
• Speed compensate: Air dancer (YVGC500W)  1 set)

Washing(1) 

• Cloth capacity 12 m
• Water capacity 1 ton
• SUS304 ¢ 165 mm SUS Guide rollers  (11 pcs)
• Feed roll: ¢ 250 mm NBR Roll (Drive motor 2.2 kw Geared motor)  (1 set)
• ¢ 139 mm SUS Guide rollers  (1 set)
• Expand roll: Curved expand roll (NBR)  (1 set)
• Speed compensate by Air dancer

Washing (2)

• Cloth capacity 12 m
• Water capacity 1 ton
• SUS304 ¢ 165 mm SUS Guide rollers  (11 pcs)
• Feed roll: ¢ 250 mm NBR Roll (Drive motor 2.2 kw Geared motor)  (1 set)
• ¢ 139 mm SUS:ti’1’Fr:J-/1  (2 pcs)
• Expand roll: Curved expand roll (NBR) (1 pc)
• Speed compensate: By Air dancer  (1 set)
• Dancer controller upper/lower limit SW  (1 set)
• Squeezing Unit: 30Kw Vacuum Extractor (IRS-200)  (1 set)
• Feed & Exhaust: Feed (SUS304), Exhaust fan  (1 set)

 Hot Flue Dryer

• Manufacture: TUNG YANG  (1 Unit) STENTER  Manufacture: EHWHA GLOTECH  (1 set)

STENTER  Manufacture: EHWHA GLOTECH  (1 set)

• Model: OS12-HTFD-STS-2800
• Roll width: 2,800 m/m
• Machine speed: 5-50 m/min (MAX)(Work speed 20-30 m/min)
• Source of electricity:  400 V 60 Hz 3¢
• Stainless steel: SUS304 JIS
• Speed control system:  Inverter control

 Winder (Center drive type)

Manufacture: EHWHA GLOTECH  (1 set)

• Construction: Batch up unit consists of 1 shaft A-Frame, and Chucking safety device
• Winding dia: ¢ 1,200 mm
• Core: 3 inc (inside)
•  Connecting: SS coupling by air cylinder  (2 sets)
• Drive: 7.5 kw geared motor (Clutch change)  (2 sets)
•  tension detect: By tension sensor. (Max 500 N/m)  (1 set)
• Traverse Unit: By 0.4 kw geared motor+ 2 rollers (1 frame) +Edge sensor  (1 set)

Control system Main panel  (1 set)

• Main cabinet: Self Stand type (Panel Cooler) for Washing Unit
• Inverter:  MITSUBISHI
•  PLC: MITSUBISHI
• Operation panel: Batch off, Knife cutter, Main OP  (3 sets)

Miscellaneous item(s)

• Painting color:
• 1. Machine; Blue(Frame), White(Cover), Yellow (Stand)
• 2. Control and operating panel, Ivory